|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Model||Skeleton Limited Edition|
Watch Case: 316L. The material in this case comes from 316L, which is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Crystal: Sapphire Crystal. The material of the watch is a very common glass, which can protect your watch from scratches. Tips: The A Replica is applied with mineral glass instead of sapphire.
Luminiscence: Hands and Markers. The design of the watch’s luminiscence is hands and markers. With this watch, you will not lose your time in dark.
Case Back: Solid. xxx commonly use solid bottom covers, which can allow you to use longer and keep the watch longer.
Dial Markers: luminous dot. The luminous spot in the watch is a new type of sensor that can detect the time in the dark. When receiving a signal from an external source, this point will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Bezel Material: Stainless Steel. Bezel material is more simple and endurable. It makes you improve your taste from the inside out.
Second Markers: Minute Markers around the outer rim. The minute mark around the outer edge of the glass is one of the most recognized design elements in all industries, also known as hands. This design element has been used in many well-known designs.
Hand: Silver-tone. About the hand design of the watch is silver-tone, that makes your watch luxury and funny.
Band Material: 316L. The band is made of the best 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Water Resistance: 30 meters. The watch’s waterproof depth is 30 meters, which is a good feature for the watch. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
A Replica, AAA Replica, AAAAA Clone